固体火箭冲压发动机的工作特性分析

通过数值计算 ,分析了燃气流量固定的壅塞式固体火箭冲压发动机、等空燃比工作的固体火箭冲压发动机和非壅塞固体火箭冲压发动机的高度特性和速度特性。结果表明 ,当导弹的飞行高度和速度变化时 ,燃气流量固定的壅塞式固体火箭冲压发动机性能变化最大 ,燃速压强指数为 1 0的非壅塞固体火箭冲压发动机的性能基本实现了等空燃比调节。贫氧推进剂的燃速压强指数越高 ,非壅塞固体火箭冲压发动机燃气流量的自适应调节能力越强。     

微小型固体火箭发动机点火特性试验

设计了一种适用于某微小型固体火箭发动机的点火器 ,对某微小型固体火箭发动机的点火特性进行了大量试验研究 ,引入了初始点火压强的概念 ,找出了影响点火延迟时间散布的主要规律 ,确定了能满足微小型固体火箭发动机点火性能的点火方案     

Periodic review inventory management with contingent use of two freight modes with fixed costs

We study a stochastic inventory model of a firm that periodically orders a product from a make‐to‐order manufacturer. Orders can be shipped by a combination of two freight modes that differ in lead‐times and costs, although orders are not allowed to cross. Placing an order as well as each use of each freight mode has a fixed and a quantity proportional cost. The decision of how to allocate units between the two freight modes utilizes information about demand during the completion of manufacturing. We derive the optimal freight mode allocation policy, and show that the optimal policy for placing orders is not an (s,S) policy in general. We provide tight bounds for the optimal policy that can be calculated by solving single period problems. Our analysis enables insights into the structure of the optimal policy specifying the conditions under which it simplifies to an (s,S) policy. We characterize the best (s,S) policy for our model, and through extensive numerical investigation show that its performance is comparable with the optimal policy in most cases. Our numerical study also sheds light on the benefits of the dual freight model over the single freight models. © 2011 Wiley Periodicals, Inc. Naval Research Logistics, 2011     

基于聚类算法的多无人机系统任务分配

针对现有任务分配方法在任务点较多时不易解算,且计算量大的问题,提出了基于模糊C-均值聚类算法的多无人机系统任务分配方法.首先,利用模糊C-均值聚类算法得到的隶属度矩阵对任务点进行初始分配;其次,针对基于空间划分聚类可能造成各UAV任务不均衡的问题,设计任务的局部优化调整规则;最后,结合单旅行商问题,利用Tabu Sea...     

Quantifying the performance effects of idle time utilization in multiserver systems

In many practical multiserver queueing systems, servers not only serve randomly arriving customers but also work on the secondary jobs with infinite backlog during their idle time. In this paper, we propose a c‐server model with a two‐threshold policy, denoted by (e d), to evaluate the performance of this class of systems. With such a policy, when the number of idle servers has reached d (<c), then e (<d) idle agents will process secondary jobs. These e servers keep working on the secondary jobs until they find waiting customers exist in the system at a secondary job completion instant. Using the matrix analytic method, we obtain the stationary performance measures for evaluating different (e, d) policies. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2007.     

一般民用建筑火灾特点与起火部位认定

从建筑火灾特点出发,阐述了建筑火灾发展阶段的蔓延特点、烟气流动特性与起火部位的内在联系,说明这些建筑火灾特点对起火部位的认定作用。     

解析美国大学TESL硕士培养的主要课程与设置理据——以曼卡托明尼苏达州立大学为例

把英语作为第二语言的教学是20世纪60年代在美国兴起并逐步走向独立的科目,它在综合相关专业的同时正在朝专业化方向发展。近年来其硕士层面的教育为全球培养了大量合格的中小学英语教师,取得了较好的成绩。本文以曼卡托明尼苏达州立大学英语系为例,并结合笔者在该系攻读TESL硕士学位时的经历,解析其主要课程及设置理据。     

(修，2撤3)关键几何参数对超声速膨胀器流场和性能影响的数值研究

为了揭示关键几何参数对超声速膨胀器流动特性影响的规律,对3种隔板安装角和5种出进口面积比超声速膨胀器设计工况下的流场进行了数值研究。结果表明：随隔板安装角增加,斜激波向出口迁移,斜激波强度略有降低,超声速膨胀器膨胀比减小,效率提高;随出进口面积比增加,流道内高速区显著扩大并逐渐靠近压力面,斜激波增强,出口流动损失增加,超声速膨胀器膨胀比增大,效率降低。为获得综合性能较优超声速膨胀器结构,需在较小出进口面积比和较大隔板安装角之间做折衷选择。     

基于大涡模拟的气体羽流分层特性数值模拟

采用大涡模拟(LES)对气体羽流分层特性进行数值模拟,分析了基于LES的气体羽流模型、控制方程和数值计算方法,探讨了LES在多组分气体羽流模拟中的应用;以文献[1]中氦气在空气中形成羽流的实验数据为参考,对所建模型进行验证。利用该模型对密闭空间油气泄漏过程进行数值模拟,计算结果表明油气在泄漏发生的240 s之内,不同组分表现出显著不同的分层规律:相对于空气,密度较大的组分聚集在空间下部20%的范围内;密度较小的组分主要分散在空间上部80%的范围内。研究结果为油库油气危险源安全监测与预警、火灾预防与扑救等提供了关键参数参考和工程设计理论依据。     

水顶油顺序输送油水混合模型研究

顺序输送是利用一条管道输送多种油品,因其可最大限度发挥管道输送潜能而被广泛应用。按照前后行液体不同可分为水顶油、油顶水和不同油品间顺序输送等,其中水顶油顺序输送主要用于管道撤收前的排空作业。对水顶油顺序输送油水混合过程进行了分析,建立了油水混合模型,利用CFD对其进行数值求解,并将仿真结果与前期理论分析进行了对比,两者吻合较好。所得结论可为机动管线水顶油排空作业提供科学指导。